Guitar neck, the sequel

Neck and neck

This is much easier with a band saw.

Planing sides that will join together. Should equalize any discrepancy if I’m not perfectly 90 degrees.

And more guitar stuff…

Made another neck.  This time I cut and laminated a 5 ply neck together.  Using old mahogany porch boards, there are a lot of holes, so I should get a better yield doing it that way.  I also made the headstock scarf joint oposite the first.   It sits on top of the neck directly under the fingerboard as opposed to under the neck.

I think I did the headstock better on the first and the heel better on the second.  Should be able to use both.  Not sure if the way I made them will make any difference.

Still prepping other materials…