A bit late on guitar updates

I’ve been really bad at keeping this up to date.  There are probably about 15 posts I could make at this point, but I’ll keep it short and post a pictoral update.

I actually made a test guitar body to try a few things out.  I’ll skip all that stuff and move to the real guitars.

For these two, I wanted to try laminated linings, made of basswood and walnut in this case.  After one other attempt in laminating right on the guitar form, I made some simple fixtures and roped them together.  This worked really well.

IMG_9242

 

These will be my first cutaways.  The sides were thicknessed, primarily with the drum sander, then switching to a scraper.  The bass side was a simple bending operation.  The treble side was a bit more complicated.  I bent the waist and lower bout, then cut the side at the start of the cutaway and bent the remainder in reverse.  All this to get a good match on the wood grain and ambrosia stripe.

IMG_9531

 

The match was good enough that I decided to try to miter the point and skip binding it.  Worst case is if it didn’t turn out, I could resort to binding.

Mitered the tip.

IMG_9541

 

Came out nicely.  I even wrapped the side over the neck block, simply because I didn’t decide on a final style for the heel yet.

IMG_9552

 

Back to the linings.  Rather than just radius the inside corner, I had a scratch stock that I made.  I used it to dress the profile.  Came out well and probably didn’t take any longer than a simple radius.

IMG_9279

 

Inside detail of finished rim.

IMG_9597

 

Finished rim.  Minus soundport.

IMG_9568

 

The tops and backs were joined.

The bracing was split and prepped.

IMG_9605

I did a fairly tight radius on the backs.  This led to a rather unorthodox clamping method, both for the changing radii and for a quick glue up with hot hide glue,

Trial fixture.

IMG_9612

 

Better final fixture.

IMG_9625 IMG_9628 IMG_9624

I also made all the binding from raw wood as well as the rosette.

Here is the binding.

IMG_9307

 

And purfling.

IMG_9326

 

I’ll make a separate post on the rosette.

Thats about it for now.  Short post for a lot of work.

Advertisements

Feedback

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s